From block paving to tarmac, resin-bound to gravel. We reinstate your driveway to the exact standard it was before excavation, with matched materials, invisible joints, and a 2-year written guarantee.
Every driveway reinstatement follows the same auditable sequence. Here is exactly what happens at each stage.
Before the first spade hits the ground, our reinstatement crew carries out a full pre-excavation paving audit. We photograph the existing driveway from multiple angles, identify the manufacturer and range where possible (Marshalls Drivesett Tegula, Brett Omega, Tobermore Tegula, and the rest), note the exact laying pattern (herringbone, stretcher bond, basket weave, mixed-size modular), record any colour blends, and measure existing levels and falls. A physical block sample is retained for supplier matching. This up-front audit is the single biggest factor in whether the finished reinstatement is invisible or obvious, so we do not skip it, and we do not rush it.
With the audit complete, we send the retained sample to the manufacturer or an approved distributor to confirm the exact product code and blend. Where the range is still in production, we order matched blocks direct so the finish is indistinguishable from the surrounding driveway. Where the range has been discontinued, we present the closest available match alongside the original for client sign-off in writing before any order is placed. For pattern-imprinted concrete and resin-bound surfaces, we work with the original installer where traceable, or colour-match in-house using the same aggregate blend and topcoat system.
During the connection excavation, existing blocks are lifted carefully by hand, stacked on boards, and protected for reuse wherever possible, which minimises waste and gives a better colour match than all-new material. Once the utility pipe or cable is in and tested, we reinstate to BS 7533: Type 1 MOT granular sub-base compacted in 75mm layers to a total depth of 150mm, a 30-50mm sharp sand laying course screeded true, blocks re-laid to the original pattern working from the retained edge back towards new, and kiln-dried jointing sand brushed and vibrated into every joint. Mortar-bedded slabs, resin, and tarmac follow their own BS-compliant build-ups.
Before we leave site, the reinstatement is snagged against a written checklist. Joint widths are checked for consistency, the finished surface is swept and vibrated a final time to lock joint sand, levels and falls are verified against the pre-excavation levels (1:60 minimum fall away from the property to avoid ponding), and a full photographic record is captured and added to your project file. The client then walks the driveway with our crew supervisor for sign-off. A 2-year written guarantee is issued on the spot, covering settlement, joint failure, and material defects, with our direct office number for any post-handover concerns.
Every driveway we reinstate is matched to the original material, built on full BS 7533 sub-base, and signed off against a photographic record. These are real USP jobs, not stock photos.
The critical parameters that govern every domestic driveway reinstatement we carry out.
End-to-end capability from a single NRSWA-qualified reinstatement provider.
Every driveway reinstatement we deliver meets the highest industry standards. Worker safety, public safety, environmental responsibility, and project compliance from audit to sign-off.
50 Google Reviews
I contacted USP and within minutes had a chat with Justin who described exactly how the job would be done and provided a comprehensive quote including labour and materials and was able to start the work in just 7 days. Justin and his team were brilliant and did an amazing job. I can highly recommend USP.
Jack and Joel were absolutely amazing this morning and really put themselves out to dig a hole without having to dig another hole in my drive. More work for them but one happy customer.
From the initial quote through to work completion, Justin and his work partner were a mix of professional, knowledgeable, good-humoured, and clear in all explained (I felt an instant ease to agree to the work). The work itself was excellent and they left the place immaculate!
George and Jack come out today to move a gas meter. It wasn't a straightforward job, but they both took time to talk me through what they were doing and what the next steps are. Very friendly and polite and thought about the needs of our family.
Jack and George are great.
Bang on time, completed the work perfectly, no issues. Left the meter really neatly finished. Jack and Joel were very courteous and did a great job.
George and Jack turned up and did a first class job, very friendly and professional. Great job lads.
Jack and Joel were brilliant. Very polite, worked to my highest expectations. Left the area as clean and tidy, as was possible. And explained every step of the process to me, answering any questions I had.
Fantastic work from Jack and Johl.
Tell us about your driveway and connection job and we will send you a free, no-obligation reinstatement plan within 24 hours.
Prefer to talk? Call 024 7542 6505 for immediate service.